1. The ei type transformer consists of an iron core, coil winding (including insulation layer), oil tank, etc.
2. Slotted on the iron core and equipped with magnetic steel;
3. The coil is wound on the inner wall of the coil sleeve and forms a closed loop in contact with the oil core;
4. The oil tank and the shell are connected by screws to form a sealed box body;
5. To ensure that the temperature of the transformer does not exceed the allowable value during normal operation and that the cooling conditions are carried out normally, heat sinks or heat sinks are installed
6. According to usage requirements, a voltage regulator can be installed to change the output voltage level
7. When the power frequency is higher than 50Hz, an auto transformer with tap can be selected as the current regulator to adjust the input power factor
8. It can be manufactured using dry epoxy resin vacuum casting process according to actual needs.
